The long haul

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: The long haul

Re: The long haul

Post by Sweeps » Sun Apr 13, 2014 9:53 pm

Lauren wrote:I know that hose on the throttle body isn't clamped yet, but do you think it will stay on alright with engine flex and all that high boost pressures?

Just looks like it could be a bit marginal.

Good work though!


There's not a lot on there but there is a nice recess which allows the clamp to be nice and tight, another little trick is to smear the inside of the clip with a little oil. That way the clamp squeezes all the hose rather than just where the screw section is ;)

Its not come off yet

Re: The long haul

Post by Lauren » Sun Apr 13, 2014 8:38 pm

I know that hose on the throttle body isn't clamped yet, but do you think it will stay on alright with engine flex and all that high boost pressures?

Just looks like it could be a bit marginal.

Good work though!

Re: The long haul

Post by Sweeps » Sun Apr 13, 2014 6:46 pm

Chaycore wrote:what was that exhaust originally off of?


I Genuinely don't, it was gifted to me by Paul at Japspeed, it was on his shelf and he didn't know what car it was for so let me have it.

It had to undergo a lot of changes when i made it fit.

Image

Image

Image

Re: The long haul

Post by Chaycore » Sun Apr 13, 2014 3:48 pm

what was that exhaust originally off of?

Re: The long haul

Post by Sweeps » Sun Apr 13, 2014 9:41 am

Image

Image

Fidanza flywheel and bespoke Helix clutch

Image

Image

Made by my own fair hand

Image

Ready to make my own under axle exhaust

Image

Re: The long haul

Post by Sweeps » Wed Apr 09, 2014 10:12 pm

Image

Image

4AGE to W58 bell housing from Malaysia

Image

Then after a bit of work had been carried out it soon became apparent this shell was beyond repair. With hole every where and no panels available to repair around the lower windscreen, and the chance of buying another better condition shell. The shell was put up on ebay, this guy wanted the roof skin due to it being a none sunroof version.

Image

The whole shell had rust removed and seam welded.

On to shell number two.

Image

Image

They all seem to be rotten on the rear chassis leg

Image

Image

Image

Re: The long haul

Post by Sweeps » Wed Apr 09, 2014 9:37 pm

Chaycore wrote:are you running a manual or power steering rack? tempted by some rack spacers but i'm running a p/s rack


Its a manual with a 2.4 kit in it. Need to check whether you can use them on PS rack, not sure if they create the same problems as other racks where the rack passes the hydraulic pipes. Then don't work at all ...

Paz, Betty or Brother Will may know.

Re: The long haul

Post by Chaycore » Tue Apr 08, 2014 10:53 pm

are you running a manual or power steering rack? tempted by some rack spacers but im running a p/s rack

Re: The long haul

Post by Sweeps » Tue Apr 08, 2014 10:44 pm

Image

Image

A new heart 4GZE turbo

Image

Delivered for sandblasting

Image

Parts start to be collected > W58 gearbox

Image

Battle version

Image

Rack extensions

Image

Home made spit for the ease of welding

Image

To be continued :D

Re: The long haul

Post by Kev » Tue Apr 08, 2014 12:09 pm

More progress pics needed!

Top

cron