The long haul

Show us what you're spending your paycheque on

The long haul

Postby Sweeps » Sun Apr 06, 2014 2:01 pm

A lot of you will have seen my build thread on DW and might have seen my car here and there.

It started a long long time ago when a friend in York (where i lived at the time) told me of a mate who had a road rally version.

After persuading him to part with it i arranged to pick it up. With a gallon of petrol in hand and a lot of hope i poured it into the tank, jump leads attached and she started for the first time in four years. Badly, rough as hell and hunting. Upon pressing the clutch pedal things were looking good, except it stayed where i'd pushed it, on the floor. A sign of things to come.

This was back at the end of 06

I'll post a few pictures up later but for now enjoy the rust .....

Image

Image

Image

Image

Image
User avatar
Sweeps
 
Posts: 12
Joined: Mon Feb 17, 2014 10:33 pm

Re: The long haul

Postby Kev » Tue Apr 08, 2014 12:09 pm

More progress pics needed!
1 x Sprinter Trueno
1 x Peugeot 205 B18C
User avatar
Kev
 
Posts: 87
Joined: Sat Feb 15, 2014 3:47 pm

Re: The long haul

Postby Sweeps » Tue Apr 08, 2014 10:44 pm

Image

Image

A new heart 4GZE turbo

Image

Delivered for sandblasting

Image

Parts start to be collected > W58 gearbox

Image

Battle version

Image

Rack extensions

Image

Home made spit for the ease of welding

Image

To be continued :D
User avatar
Sweeps
 
Posts: 12
Joined: Mon Feb 17, 2014 10:33 pm

Re: The long haul

Postby Chaycore » Tue Apr 08, 2014 10:53 pm

are you running a manual or power steering rack? tempted by some rack spacers but im running a p/s rack
User avatar
Chaycore
Site Admin
 
Posts: 98
Joined: Mon Jan 13, 2014 5:30 pm

Re: The long haul

Postby Sweeps » Wed Apr 09, 2014 9:37 pm

Chaycore wrote:are you running a manual or power steering rack? tempted by some rack spacers but i'm running a p/s rack


Its a manual with a 2.4 kit in it. Need to check whether you can use them on PS rack, not sure if they create the same problems as other racks where the rack passes the hydraulic pipes. Then don't work at all ...

Paz, Betty or Brother Will may know.
User avatar
Sweeps
 
Posts: 12
Joined: Mon Feb 17, 2014 10:33 pm

Re: The long haul

Postby Sweeps » Wed Apr 09, 2014 10:12 pm

Image

Image

4AGE to W58 bell housing from Malaysia

Image

Then after a bit of work had been carried out it soon became apparent this shell was beyond repair. With hole every where and no panels available to repair around the lower windscreen, and the chance of buying another better condition shell. The shell was put up on ebay, this guy wanted the roof skin due to it being a none sunroof version.

Image

The whole shell had rust removed and seam welded.

On to shell number two.

Image

Image

They all seem to be rotten on the rear chassis leg

Image

Image

Image
User avatar
Sweeps
 
Posts: 12
Joined: Mon Feb 17, 2014 10:33 pm

Re: The long haul

Postby Sweeps » Sun Apr 13, 2014 9:41 am

Image

Image

Fidanza flywheel and bespoke Helix clutch

Image

Image

Made by my own fair hand

Image

Ready to make my own under axle exhaust

Image
User avatar
Sweeps
 
Posts: 12
Joined: Mon Feb 17, 2014 10:33 pm

Re: The long haul

Postby Chaycore » Sun Apr 13, 2014 3:48 pm

what was that exhaust originally off of?
User avatar
Chaycore
Site Admin
 
Posts: 98
Joined: Mon Jan 13, 2014 5:30 pm

Re: The long haul

Postby Sweeps » Sun Apr 13, 2014 6:46 pm

Chaycore wrote:what was that exhaust originally off of?


I Genuinely don't, it was gifted to me by Paul at Japspeed, it was on his shelf and he didn't know what car it was for so let me have it.

It had to undergo a lot of changes when i made it fit.

Image

Image

Image
User avatar
Sweeps
 
Posts: 12
Joined: Mon Feb 17, 2014 10:33 pm

Re: The long haul

Postby Lauren » Sun Apr 13, 2014 8:38 pm

I know that hose on the throttle body isn't clamped yet, but do you think it will stay on alright with engine flex and all that high boost pressures?

Just looks like it could be a bit marginal.

Good work though!
1985 AE86 GT Apex Sprinter Trueno. HKS cams, 2 way LSD, Tanabe exhaust, K&N, TRD suspenders.
2013 GT86, Milltek, decat, Injen induction, TE37s, TRD aero fins, TEIN Street Flex & EDFC Active Pro, mega sound system.
User avatar
Lauren
 
Posts: 77
Joined: Thu Mar 06, 2014 7:48 am

Next

Return to Build Threads

Who is online

Users browsing this forum: No registered users and 16 guests