Gents
Can anyone confirm the exact Toyota vehicle these came in?
I'm told the 4 x 4 Lite Ace had one in the front axle, can anyone confirm this?
PazzaAE86 wrote:I heard the same but its so vague that i'd never know what actual vehicle it was from..
Also, how is the 4.7 with turbo powers? Usually the preserve of high RPM cars.
I do the pajero/h100 conversion kits and the actual conversions on order.
To answer your questions about this swap here are the information you need to know:
-The conversion kit is a computer redesigned copy of the original parts with some improvements, like the built in traction bracket function. Made of 3mm thick S355 high tensile structural steel, lasercut, V-bent and MIG welded. Initially i made this so people dont have to cut up an ae86 axle to use the brackets on it, which are usually rusted thin and possibly damaged and weakened. also having a light weight built in traction bracket is a nice thing.I made these to fit perfect on the pajero axle but hey can be fitted to h100 and probably many other axles unless they are too thick.
-pajero axle info: axle can be sourced from the first generation pajero/montero short and normal wheelbase offroad cars. the chassis code is L04#G (where the # is a number, referring to the engine and trim package i think. for exmaple: L043G)
these axles should have a 2-way lsd but you must always check it. possible final drive ratios are: 4.625, 4.875, 5.29 or optionally hyundai h100 bus 4.222 final drive can be installed. the axle overall width after modifying the halfshafts to ae86 spec (halfshaft to disk mating faces distance from left to right side) is: 1395mm
-H100 axle info: these must be hyundai h100 bus rear axles (2.5D) they come with preloaded non torque sensitive lsd or open diff and 4.222 final drive. Pajero or L300 2-way lsd can be installed by some modification. the axle overall width after modifying the halfshafts to ae86 spec (halfshaft to disk mating faces distance from left to right side) is: 1450mm
-weight: i only measured a h100 axle after the build, without brakes. 71kg. pajero should be close to this.
Users browsing this forum: No registered users and 5 guests