Tekno Trueno

Show us what you're spending your paycheque on

Tekno Trueno

Postby Team Tekno » Wed May 07, 2014 12:38 am

Not sure where to start here Ill get it up to date as quick as i can. I picked my 86 up late 2010 in a mildly tuned state (coilovers with trd inserts + uprated rear shock & spring,lsd, exhaust etc). It was in poor condition with a lot of body work needed despite having nicely rolled arches.

As I got it

Image

Image

After the obligatory lowering and fitting with stupid wheels

Image

Got the bad bits fixed and re-sprayed in early 2011 and got rid of any rust in the bootwell. I basically rocked it like this for three odd years?I picked up Uras and Rough bumpers and a glassray bonnet along the way
Image
Image
Image

I stripped the car last October for spraying, the back arches were totally fucked and I always wanted it fully black. So new rear arches re-welded and new front wings all in Jet black along with all the aero and ec works mirrors. I'm still putting it all back together as I'm fixing all the little problems the car always had (the previous owner was the worst mechanic ever).
As it sits now.
Image
Image
Image

Rough Spec
Standard Big port 16v
RSR manifold with custom pipe and twin 5zigen rocket 2000 cans
Trd leads

Front Coilovers Tein springs w/ Avo shocks Cusco top mounts and Rca
Trd blue rear w/ unknown springs
uprated rear arb
unknown Lsd
Rack spacers w/ power steering knuckles
185/55/14 yokohama s.drive front Kumho Ku35 rear
Adj. pan hard with bracket support bar.
Pro spirits rear brace / Fet front brace

Glass ray bonnet
early rear bumper
uras/rough/budounoki/kouki front bumper

East bear carbon seat
Nardi wheel

Plans are to get driving again soon wit the standard engine and build an engine which I've been collecting bits for. So far I have a ported & polished smallport head with kent 302 cams and mikuni 44's which I'll be looking to add a bottom end similar spec to Paz's.

Tonight I finally plucked up the courage to drill my wings for the bumper and fitted rivnuts to the bootlid so I can take the trd wing on and off. Had to pull the dizzy off to replace the seals and bearing as it was leaking oil over the manifold.

Kevin
User avatar
Team Tekno
 
Posts: 6
Joined: Mon Mar 03, 2014 10:49 pm

Re: Tekno Trueno

Postby Kev » Wed May 07, 2014 12:06 pm

Nice! I contemplated putting my car back to black as that was its original colour. Do the rack spacers make a big difference on the steering?
1 x Sprinter Trueno
1 x Peugeot 205 B18C
User avatar
Kev
 
Posts: 87
Joined: Sat Feb 15, 2014 3:47 pm

Re: Tekno Trueno

Postby PazzaAE86 » Wed May 07, 2014 5:26 pm

My brother! Looking good Kevin. Soon!
PazzaAE86
 
Posts: 23
Joined: Sat Feb 15, 2014 3:54 pm

Re: Tekno Trueno

Postby Team Tekno » Wed May 07, 2014 5:39 pm

Are half of my pictures missing or is it just my phone!?
User avatar
Team Tekno
 
Posts: 6
Joined: Mon Mar 03, 2014 10:49 pm

Re: Tekno Trueno

Postby Team Tekno » Wed May 07, 2014 5:40 pm

PazzaAE86 wrote:My brother! Looking good Kevin. Soon!


Yes paz soon we ride
User avatar
Team Tekno
 
Posts: 6
Joined: Mon Mar 03, 2014 10:49 pm

Re: Tekno Trueno

Postby jimjimkp61 » Mon Jun 16, 2014 11:05 pm

Fellow Black brother! absolutely delicious!
Chrome trim looks amazing! looks very similar to mine before i put the CBY guards and skirts on!
User avatar
jimjimkp61
 
Posts: 10
Joined: Tue Mar 11, 2014 8:04 am
Location: Wellington, New Zealand


Return to Build Threads

Who is online

Users browsing this forum: No registered users and 3 guests