Trueno Hatch Tofu Terrorist F20c (photos only build thread)

Show us what you're spending your paycheque on

Trueno Hatch Tofu Terrorist F20c (photos only build thread)

Postby lewisnoakes » Wed Sep 16, 2015 12:45 pm

Hi my names Lewis
I've been around Japanese cars for a few years all of which stemed from a honda engine conversion I did in my mini when I was 17.
Here are some of my other cars I currently own.

Image

Image

Image


This is my first experiance of ae86 ownership but after few patient years I thought it was about time I made my dream a reality.
At the start of the year I started scowering the japanese auction sites for a sutible 86 to import. After a few weeks of searching id found a car that I HAD to buy! So I got in contact with OPJP who had just started importing cars for customers here in the uk.

Image

Image

Image

After 6 long weeks she finally arrived!

Image

Image

Image

Image

Image

She needed some TLC!

Image

Image

Image

Image

Image


I got straight to work.
A few more jdm goodies some expected and some unexpected

Image

Image

Image

Image

Image

Image

a few coats of underseal later

Image

A little clean before the first drift day

Image

Image

Image

Image

Image

Image


Shropshire drift day

Image

Image

Image

Image

Image

Image


Dropped a headlight :evil: so bought some more raybrigs.

Image

split my ssr mesh wheels ready for rebuild. Thought about reverse mounting but after some thought i kept down the safer route

Image

A small hint of whats to come in the foreground!!

Image

Extended my lcas 25mm and strengthend them along with some battle version 2 spacers.

Image

Image

Image

Image

Image

Wheel centres painted.

Image

Wheels rebuilt, lips polished, new hardware and all sealed in carbon collecting wheel sealant

Image

Image


After a long few months of waiting, confusion and mistakes from hmrc my car is finally on the road.

Image

Image

Image


Heres a little hint of what the future holds for this little corolla (excuse the face)

Image
Last edited by lewisnoakes on Tue Jan 05, 2016 4:51 pm, edited 6 times in total.
User avatar
lewisnoakes
 
Posts: 18
Joined: Thu Apr 16, 2015 4:06 pm

Re: Trueno Hatch Tofu Terriost

Postby lewisnoakes » Wed Sep 16, 2015 12:48 pm

Current spec list.

Engine:
Trd ht leads
Clear cam pulley cover
Stainless steel exhaust manifold
Jasma Ss exhaust
Lightweight flywheel
Uprated clutch
Optima battery
Hks air filter

Chassis:
Front and rear strut brace
T3 caster rods
T3 Rose joint tie rods
Extended lcas
Weld on Coilovers front suspension
Trd blue adjustable rear dampers
Trd springs
Trd 4 link rear
Trd panard rod
Trd lsd
Fully pollybushed front and rear
Toy tuning extended knuckles
Battle version #2 lock kit
Braided brake lines
Camber and height adjustable top mounts
Ssr mesh wheels 14x7.5 and 14x8
15mm rear wheel spacers

Exterior:
J blood fibreglass bonnet
J blood side skirts
J blood fibreglass wide vented front wings
J blood front bumper
J blood wide rear arch
Fibreglass rear bootlid
Aftermarket side mirrors
Raybrig headlights

Interior:
Cusco 6 point roll cage
3x blitz gauges
Broadway rear view mirror
Trd quickshifter
Alloy gearknob
Fly off handbrake
Subway grab handle
Spats steering wheel
Carbon stereo blank

If anyone could correct me on any of the parts that Ive listed I would appreciate it.
User avatar
lewisnoakes
 
Posts: 18
Joined: Thu Apr 16, 2015 4:06 pm

Re: Trueno Hatch Tofu Terrorist

Postby Kev » Wed Sep 16, 2015 8:22 pm

That came with a lot of mods! How do you find the extended arms vs standard?
1 x Sprinter Trueno
1 x Peugeot 205 B18C
User avatar
Kev
 
Posts: 87
Joined: Sat Feb 15, 2014 3:47 pm

Re: Trueno Hatch Tofu Terrorist

Postby lewisnoakes » Thu Sep 17, 2015 9:39 am

Yeah I was very lucky. I was looking for one which had been modifed as that was always my intention also.
I'm yet to give it a good shakedown since fitting the extended lcas but I found the front end feels to dive in a little faster. With the downside of heavier steering nearer the end of the rack.
User avatar
lewisnoakes
 
Posts: 18
Joined: Thu Apr 16, 2015 4:06 pm

Re: Trueno Hatch Tofu Terrorist

Postby lewisnoakes » Sat Oct 03, 2015 11:34 am

Went to Santa Pod on the 30/09/15 for dwyb this was my second drift day and a few components had changed since the last day at the shropshire event.
There was an amazing turn out 15 Corollas. Was good to finally put some faces to names/cars.
Highlight of the day had to be the 14 Corolla train :D

A few snaps of how I got on. Spent most of the day In the play pens and the kidney as my steering needed some practice.
The car needs some refinement as I struggled with a load of understeer. Got some great advise off Mitto and it seems to lie with geo and tyre pressures.

Image

Image

Image

Image

Image

Image

Image

On to the next one!
User avatar
lewisnoakes
 
Posts: 18
Joined: Thu Apr 16, 2015 4:06 pm

Re: Trueno Hatch Tofu Terrorist

Postby lewisnoakes » Sun Oct 04, 2015 11:32 am

A few more snaps from dwyb on the 30/09/15 taken by various people.

Image

I need better fitment skid wheels!

Image

Image

Image

Made some progress with the F20 engine completed a few little jobs.
(sorry for the poor quality photos my camera phone has recently become damaged)

Engine all painted up and cam cover in oem wrinkle paint

Image

Image

Image


Stealth mode. For that oem look!

Image

Image

Image

Image

Knocked out an EGR

Image

Image

Oh and my front wheel bearings shat themselves.

Image

Image

Image

Image

Next job to tidy this f20 engine harness up....
User avatar
lewisnoakes
 
Posts: 18
Joined: Thu Apr 16, 2015 4:06 pm

Re: Trueno Hatch Tofu Terrorist

Postby mad_matt » Mon Oct 05, 2015 1:56 am

Looks like a good project dude :)

What engine mount route you going? Full custom with new tunnel or JSP Fab Mounts?
mad_matt
 
Posts: 50
Joined: Wed Aug 27, 2014 12:06 am

Re: Trueno Hatch Tofu Terrorist

Postby lewisnoakes » Mon Oct 05, 2015 11:46 am

Using jsp mounts they should be arriving in the next few days. I want to avoid cutting the tunnel as I want to retain a full interior.
Need to start thinking about how I'm going to correct the geometry!
User avatar
lewisnoakes
 
Posts: 18
Joined: Thu Apr 16, 2015 4:06 pm

Re: Trueno Hatch Tofu Terrorist

Postby mad_matt » Mon Oct 05, 2015 12:53 pm

Adjustable LCAs might give you a hand towards that goal along with some adjustment of all the T3 stuff you already have :)

Sounds like a pretty good plan :) You only need to lightly "massage" the tunnel with the JSP mounts. I'd be doing the same if I was going down the same route.... ;) I'll be watching this quite closely!
mad_matt
 
Posts: 50
Joined: Wed Aug 27, 2014 12:06 am

Re: Trueno Hatch Tofu Terrorist

Postby lewisnoakes » Mon Oct 05, 2015 7:19 pm

I suppose it'll be a little of trial and error. Finding what I prefer best.
I'm going to try some 40mm Rcas and spacers on the turret tops to space the coilover strut down. Then adjust ride height accordingly.
Ohhh the tunnel aperture will be carefully moulded haha. ;)
User avatar
lewisnoakes
 
Posts: 18
Joined: Thu Apr 16, 2015 4:06 pm

Next

Return to Build Threads

Who is online

Users browsing this forum: No registered users and 71 guests